Rx60 Overview

Wired

No wires

Top

Bottom

Blade Tx

Tx21

Tx22

PRODUCT: Rx60
VERSION: 603
PCB ID: 60b (printed)
PCB MARK: 03 (hand written)

THIS VERSION IS: Rx60b - v603
OLDER VERSION: Rx60a - v602
NEWER VERSION: Rx60b - v610
NEWER VERSION: Rx60c - v611

DESCRIPTION:
Receiver for surface vehices.
All variants are physically identical and have the same software but different defaults.
All outputs can be changed individually by operator.

Variant	Rx60-1	Rx60-2	Rx60-22	Rx60-3	Details
Purpose:	Train with joystick Tx	Train with Tx21	Train with Tx22	Conven- tional
'H' output: (H-Bridge)	1	1	1	1	Integrated forward/reverse ESC for brushed motors 512 step PWM control
Motor control	'Low off'	'Center off'	'Center off'	'Center off'
Direction channel	Yes	-	-	-
'P' outputs: (Pads)	4	4	4	4	Signal pads for Servos and low current on/off switching (<20mA) Special programs for car lights and other switching 1024 step Servos Serial data feed
On/off switching	3	3	3	-
Servos	1	1	1	4
'Selecta':	-	-	Enabled (Ch2)	-	Selecta can activate and deactivate models without touching them
'L' pad: (Lipo booster monitor)	Yes	Yes	Yes	Yes	Low voltage protection for a single cell lipo when used with a voltage booster
Size:					10.6 x 21.5 x 4.0mm (0.4x0.9")
Weight:					0.8g
Pad spacing:					2.54mm (0.1")
Voltage range:					3-16v
Motor current (as supplied)					1.5A | 3.0-8.4v | <=16kHz 1.0A | 8.4-12.6 | <=250Hz Currents are with motor stalled at 100% throttle
Motor current (with heatshink)					1.5A | up to 16v | <=250Hz Currents are with motor stalled at 100% throttle Add heatsink same size as Rx or larger (eg: 0.6 x 10 x 21mm)
Rx current:					15mA
Rx outputs:					5 (see above)
Tx channels*:					14 max (9 tested)
Modulation:					2.4GHz compatible with 22ms DSM2 and DSMX Air and 16.5ms DSM2 Surface
Range:					Indoor/Outdoor

* = Channels that can be used to control receiver outputs (all outputs can be associated with any channel)

WIRES:
The 'W' version has 2 wires for power and 2 wires for the motor.

INSTRUCTIONS:

PROGRAMMING: