Rx63 Overview - v610



.

Top

Blade Tx

Tx21

Tx22

PRODUCT: Rx63
VERSION: 610
PCB ID: 63a (printed)
PCB MARK: 10 (hand written)

THIS VERSION IS: Rx63a - v610
OLDER VERSION: Rx63a - v603



DESCRIPTION:
Receiver for surface vehices.
All variants are physically identical and have the same software but different defaults.
All outputs can be changed individually by operator.

SPECIFICATION:
Variant

Rx63-1 Rx63-2 Rx63-22 Rx63-3 Details
Purpose:

Train
with
joystick Tx

Train
with
Tx21

Train
with
Tx22

Conven-
tional
'H' output:
(H-Bridge)
1
1
1
1
Integrated forward/reverse ESC for brushed motors
512 step PWM control

Motor control
'Low off' 'Center off' 'Center off' 'Center off'
Direction channel
Yes -
-
-
'P' outputs:
(Pads)
4
4
4
4
Signal pads for Servos and low current on/off switching (<20mA)
Special programs for car lights and other switching
1024 step Servos
Serial data feed

On/off switching 3 3 3 -
Servos 1 1 1 4
'Selecta':

- - Enabled
(Ch2)
- Selecta can activate and deactivate models without touching them
'L' pad:
(Lipo booster monitor)
Yes Yes Yes Yes Low voltage protection for a single cell lipo
when used with a voltage booster
Size: 9.6 x 16.6 x 2.6mm (0.4x0.65")
Weight: 0.53g
Pad spacing: 2.54mm (0.1")
Voltage range: 3-13v
Motor current
1.0A | 3.0-4.2v | <=16kHz
0.5A | 4.2-8.4v | <=16kHz
Currents are with motor stalled at 100% throttle
Rx current: 15mA
Rx outputs: 5 (see above)
Tx channels*: 14 max (9 tested)
Modulation: 2.4GHz compatible with 22ms DSM2 and DSMX Air
and 16.5ms DSM2 Surface
Range: Indoor/Outdoor

* = Channels that can be used to control receiver outputs (all outputs can be associated with any channel)

WIRES:
The 'W' version has 2 wires for power and 2 wires for the motor.



INSTRUCTIONS:

Rx63-1 Rx63-2 Rx63-22 Rx63-3 Change
Version v6.0.3
v6.0.3
v6.0.3
v6.0.3
Adjustable Selecta delay, Directional lights, Infrared, Auto lipo booster, SumPPM
Version v610
v610
v610
v610
Toggle servo, Adjustable LVC, Prog3, Variant change
v610-1 18ch XPlus core
v610-2 P1/P2 hard reset
v610-3 Enable 18ch
v610-4 Battery Voltage flashes
v610-5 Option for pads to idle 'high'; Softstart more like Inertia
v610-6 Extra LED2 option
v610-7 Buffer Stop, Stop & Reverse

PROGRAMMING:

Programming Features
Version v603
v603
Version v610
v610





Home Videos About Buy Email